EMC IO Interface
The unique AD / DA Converter for use during EMC Measurements
The RadiMate® is a four channel high performance A/D and D/A converter. It is especially designed for use in EMC measurements where high test levels are applied to equipment under test. The RadiMate® is based on a small remote unit with four input channels that can be positioned in close proximity to the EUT in it’s test environment. The RadiMate® measures and converts the analog signals into optical and interfaces to an optical plug-in card which is installed in the RadiCentre® EMC test system mainframe.
High input impedance
The extreme high input impedances of the four RadiMate® input channels makes it possible to perform measurements on EUT without influencing the behaviour of the EUT.
High Speed
With speeds up to 60 samples per second the RadiMate® is suited for almost all high speed EUT measurement applications.
High resolution
Its unprecedented 16 bits resolution enables very accurate measurements even at very high impedances.
Immunity
Immune till 300 V/m the RadiMate® is suitable for all domestic, industrial and most automotive, military and aerospace EMC measurements.
The complete solution
The complete RadiMate® system contains the following items:
• The RadiMate ® A/D and D/A Converter
• Optical interface plug-in card for RadiCentre®
• 10 meter duplex fiber with FSMA and ST connectors
• Serial cable (straight, fully wired)
• Battery charger
• Four test lead cables with clips
• CD with manual and software
• Laser Power Supply (optional)
Technical specifications
|
RadiMate® EMC interface four channel A/D- D/A-converter | ||
|
Prestations |
|
Inputs |
: |
four-channel differential |
|
Input reach |
: |
- 5 to +5 V |
|
Input impedance |
: |
> 100 MΩ (buffer out); > 1GΩ (buffer on) |
|
Input resolution |
: |
16 bit effective |
|
Measuring speed 1 |
: |
1 Ch.: 60 smpls/s; 2 kan.: 20 smpls/s; 3 kan.: 10 smpls/s; 4 kan.:8 smpls/s |
|
Outputs |
: |
four channel single ended |
|
Output reach |
: |
0 tot +5 V |
|
Output impedance |
: |
< 50 Ω |
|
Output resolution |
: |
10 bit |
|
Surrounding conditions | ||
|
Temperature reach |
: |
15° to 35°C |
|
Relatieve humidity |
: |
10 - 90% (non-condensing) |
|
Conducted immunity 2 |
: |
>300 mA; 10 kHz up to 400 MHz |
|
Radiated immunity 2 |
: |
>300 V/m; 30 MHz up to 4 GHz |
|
ESD-immunity 2 |
: |
>16 kV |
|
Dimentions | ||
|
RadiMate |
: |
120 x 62 x 33 mm |
|
Serial interface |
: |
48 x 52 x 26 mm |
|
Power | ||
|
Battery |
: |
NiMH pack, 7.2V/150mAh or with optional Laser Power Supply |
|
Autonomy |
: |
10 hour operation time |
|
Loading time |
: |
2,5 hours |
|
Voltage |
: |
230 VAC |
|
Power |
: |
15 W |
|
Optical communication | ||
|
Communicationspeed |
: |
38400 bps |
|
Communication settings |
: |
8 bits, no parity, 1 stop bit |
|
Data Connector to RadiMate ® |
: |
ST |
|
Dataconnector of the RadiMate ® |
: |
FSMA |
|
Glassfiber |
: |
200/230 µm HCS, duplex |
|
Standard Glassfiber length |
: |
10 m |
Resellers
Click here for a complete list of resellers.
Brochure
Click here for the brochure in .pdf format (in English).
References
RadiMate® EMC IO Interface is used by a host of international clients in many areas.
Click here for an overview of some RadiMate® users.
For more information about the RadiMate EMC interface or any of the other products of DARE!! Instruments you can use our contact form.
You can also call or email. See the contact information above.
D.A.R.E!! Instruments
Vijzelmolenlaan 7
3447 GX Woerden - The Netherlands
Tel.: +31 348 416 592
Fax.: +31 348 499 732
e-mail: instruments@dare.nl
